Standard Cable Glands with Thread, Stainless Steel


M25x1,5 / 7,0-12,0mm / TL=12,0mm

Stainless steel cable glands with lamellar clamping

• For high quality machines and housings.
• For high quality applications in corrosive environments.
• Applications: Outdoor, food industry, pharmazeutical industry and other sensitive applications.
• Easy assembly: install cable gland - insert cable - tighten cap.
• High quality strain relief and sealing, reliable performance for standard industrial applications.
• Up-to-date international approvals.

Products specifications
Material Body , Cap Stainless steel 1.4305 (AISI 303)
Seal CR ( Chloroprene )
Clamping Insert PA 6 (Polyamide 6)
O-Ring NBR
Ingress Protection Rating IP 68 - 5 Bar, 30 min
Flammability V2 according to UL94
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Thread Type
Metric EN 60423
PG DIN 40430
NPT ANSI B1.20.1
Other thread types also available upon request.
Cable Type Non Armoured
Accessories Lock nuts
Dome plugs
Reducing seals
Flat cable seals
Multihole seals
Gaskets ( Washers )
Remarks Different sealing types available.
In compliance with DIN EN 62444.
We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
Some approvals do not cover all sizes.
Accessories must be ordered separately.
Some approvals do not cover all sizes.
O-ring available in Metric and PG threads as a standard. For NPT -
threads O-ring available upon request.
Note: Applications of most cable glands don't require same parameters -
applied to tests. For applications strictly acc. to the approval definitions -
please consult data sheet.
Outer Thread Size (Male) M25x1,5
Thread Length (TL) 12,0 mm
Ø (D) 30,0 mm
Clamping Range Outer Sheath Ø min - max 7,0 - 12,0 mm
Spanner Width Cap 24 mm
Body 27 mm
max. Height (H) 30,0 mm
Part Number BMSE-03R
Order Coding
Part Number
Gasket (Washer)
Lock Nut
Sealing Plug
See table
WC Chloroprene
WS Silicone
L Lock nut
P Dome Plug
T Dust Plug