RJ 45 Glands Brass


M25x1,5 / 3,0-6,0mm / TL=12,0mm / SW=24/27

Cable glands for RJ 45 cables

• For standard industrial applications using data cables with pre-assembled cables with RJ 45 connectors.
• For metal machines and housings.
• For industrial applications in harsh environments.
• Easy assembly:1- feed connector through cable gland 2- assemble splitted seal around cable
3- insert seal into gland body 4- install cable gland 5- tighten cap.
• High quality strain relief and sealing, reliable performance for standard industrial applications.

Products specifications
Material Body , Cap Brass Nickel plated
Seal CR ( Chloroprene )
Clamping Insert PA 6 (Polyamide 6)
O-Ring NBR
Ingress Protection Rating IP 68 - 5 Bar, 30 min
UL Environmental Rating TYPE 1, 4X acc. to UL 50E
Flammability V2 according to UL94
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Thread Type
Metric EN 60423
Other thread types also available upon request.
Cable Type Non armoured, with pre-assembled RJ 45 connector.
Accessories Lock nuts
Dome plugs
Remarks In compliance with DIN EN 62444.
We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
O-ring available in Metric and PG threads
Accessories must be ordered separately.
Outer Thread Size (Male) M25x1,5
Thread Length (TL) 12,0 mm
Ø (D) 30,0 mm
Clamping Range Outer Sheath Ø min - max 3,0 - 6,0 mm
Spanner Width Cap 24 mm
Body 27 mm
max. Height (H) 30,0 mm
Part Number BMBERJ-03-C