Material |
Body, Cap |
PA 6 (Polyamide 6) |
O-Ring |
CR (Chloroprene) , Silicone |
Ingress Protection Rating |
IP 68 - 5 Bar, 30 min |
IP 66 |
Operating Temperature |
O-ring Material |
CR (Chloroprene) |
Silicone |
Ex-i |
-40°C to +70°C |
-60°C to +70°C |
Equipment For |
Gas & Dust potentially explosive atmospheres |
Cable glands should be also used for intrinsically safe circuits Ex-i. |
Suitable for use in |
Group II Gas Group IIC ZONE1/ZONE2 |
Group III Dust Group IIIC ZONE21/ZONE 22 |
Equipment Marking |
Ex II 2GD |
Ex eb IIC Gb Ex tb IIIC Db |
Marking Example * |
BMD TP-X... CE 0722 II 2GD Ex e IIC Gb Ex tb IIIC Db IP66/68
|
Ta -40°C to +80°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X |
Impact Test Result |
4J |
Thread Type |
Metric (M) ISO Pitch 1,5 |
NPT (N) ANSI ASME B1.20.1 |
Accessories |
Lock nuts |
Gaskets ( Washers ) |
Remarks |
We recommend the use of lock nuts and gaskets to ensure IP rating for - |
rough surfaces or through holes. |
Accessories must be ordered separately. |
Outer |
Thread Size (Male) |
M50x1,5 |
Thread Length (TL) |
18,0 mm |
Ø (D) |
63,5 mm |
Spanner Width |
55 mm |
Height (h) |
9,5 mm |
Part Number |
TPI-X5 |