Polyamide Hexagonal Plugs for Ex i Applications

TPI-X2

M25x1,5 / TL=10,0mm / SW=28mm

ATEX
IMQ 13 ATEX 010X | EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-7:2015, EN 60079-31:2014 
IECEx
IECEx IMQ 13.0003X | IEC 60079-0:2011 ; IEC 60079-7:2006-07 ; IEC 60079-31:2013
TR RU
No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013
IN METRO
DNV 14.0114 X | ABNT NBR IEC 60079-0:2013, ABNT NBR IEC 60079-7:2008 ABNT NBR IEC 60079-31:2014
MARINE APPROVAL
TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444
Products specifications
Material Body, Cap PA 6 (Polyamide 6)
O-Ring CR (Chloroprene) , Silicone
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 66
Operating Temperature Seal Material
CR (Chloroprene) Silicone
Ex-i -40°C to +70°C -60°C to +70°C
Equipment For
Gas & Dust potentially explosive atmospheres
Cable glands should be also used for intrinsically safe circuits Ex-i.
Suitable for use in
Group II Gas Group IIC ZONE1/ZONE2
Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
Ex II 2GD
Ex eb IIC Gb Ex tb IIIC Db
Marking Example *
BMD TP-X... CE 0722 II 2GD Ex e IIC Gb Ex tb IIIC Db IP66/68
Ta -40°C to +80°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X
Impact Test Result 4J
Thread Type
Metric (M) ISO Pitch 1,5
NPT (N) ANSI ASME B1.20.1
Accessories Lock nuts
Gaskets ( Washers )
Remarks We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
Accessories must be ordered separately.
Outer Thread Size (Male) M25x1,5
Thread Length (TL) 10,0 mm
Ø (D) 32,0 mm
Spanner Width 28 mm
Height (h) 5,8 mm
Part Number TPI-X2
Order Coding
Part Number
Mandatory
Gasket (Washer)
Option
Lock Nut
Option
See table
*Part number for blue cap is TPI-..
WC Chloroprene
WS Silicone
WF Fiber
L Lock nut
Example
TPI-X2 WC L
* TPI-X02