RJ 45 Glands, Polyamide

BSRJ-16 , BSRJ-06 , BSRJ-26

PG 21 / 3,0-6,0mm / TL=11,0mm / SW=33/33

Cable glands for RJ 45 cables
GOST
GOST | 

• For standard industrial applications using data cables with pre-assembled RJ 45 connectors.
• Easy assembly:1- feed connector through cable gland 2- assemble splitted seal around cable
3- insert seal into gland body 4- install cable gland 5- tighten cap.
• High quality strain relief and sealing, reliable performance for standard industrial applications.

Products specifications
Material Body , Cap PA 6 (Polyamide 6)
Seal CR ( Chloroprene )
Ingress Protection Rating IP 68 - 5 Bar, 30 min
UL Environmental Rating TYPE 1, 4X acc. to UL 50E
Flammability V2 according to UL94
Operating Temperature Permanent Intermittent
-20 °C to +80 °C -30 °C to +150 °C
Thread Type
Metric EN 60423
PG DIN 40430
Other thread types also available upon request.
Cable Type Non armoured, with pre-assembled RJ 45 connector.
Accessories Lock nuts
Dome plugs
Gaskets ( Washers )
Remarks Manufactured according to DIN EN 62444/50262.
We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
Accessories must be ordered separately.
Outer Thread Size (Male) PG 21
Thread Length (TL) 11,0 mm
Ø (D) 37,2 mm
Clamping Range Outer Sheath Ø min - max 3,0 - 6,0 mm
Spanner Width Cap 33 mm
Body 33 mm
max. Height (H) 38,4 mm
Part Number RAL 7035 light grey BSRJ-16
RAL 7001 grey BSRJ-06
RAL 9005 black BSRJ-26