Hygienic Cable Glands Stainless Steel

BNHGX-01-L

NPT 3/8" / 5,0 - 10,0mm / TL=10,0mm

Cable glands for hygienic requirements
UL and Type 4X

E199260 | UL514B, CSA22.2 No 18.3-12, CSA22.2 No 94.2-1S

UL50E

EHEDG
| In progress.
MARINE APPROVAL
| In progress.
NSF/00

NSF1 | NSF/ANSI 169

NSF2 | NSF/ANSI/3-A 14159-1

• For applications in manufacturing and packaging of food and pharmaceuticals, clean room technology, biotechnology, chemical industry.
• Smooth finish prevents harmful micro organisms to stick to the surface.
• No threads are exposed.
• Gasket material according to FDA guideline 21 CFR 177.2600.
• Cleaning of cable glands is easier, faster and less expensive.
• Reliable strain relief due to strain relief element separated from grommet.
• Suitable for high pressure steam cleaning.
• Lock nut included.

Products specifications
Material Body, Cap and Inner Rings Stainless Steel 1.4305(AISI 303), 1.4301(AISI 304), 1.4307(AISI 304L), 1.4401(AISI 316), 1.4404(AISI 316L)
Clamping Ring POM
Seal EPDM, according to FDA guideline 21 CFR 177.2600
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 69
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Cable Type Non Armoured
Thread Type
Metric EN 60423
NPT ANSI B1.20.1
Accessories Lock nuts
Tightening tools
Remarks Manufactured according to DIN EN 62444/50262.
We recommend the use of lock nuts to ensure IP rating for rough surfaces -
or through holes.
Accessories must be ordered separately.
Some approvals do not cover all sizes.
Note: 304,304L,3016 and 316L are available upon request
Outer Thread Size (Male) NPT 3/8"
Thread Length (TL) 10,0 mm
Ø (D) 24,1 mm
Clamping Range Ø min - max 5,0 - 10,0 mm
Spanner Width Cap 22 mm
Bottom 10 mm
Inner Ø (ID) 10,3 mm
max. Height (H) 27,5 mm
Part Number BNHGX-01-L