Hygienic Conduit Fittings Stainless Steel

BNHF1-04-L

NPT 1" / TL=25,0mm

Stainless steel Hygienic Conduit Fittings
UL and Type 4X

E507026 | UL514B CSA22.2 No 18.3-12 CSA22.2 No 94.2-1S

 

UL50E

NSF/00

NSF1 | NSF/ANSI 169

NSF2 | NSF/ANSI/3-A 14159-1

GOST
GOST | 

Stainless steel Hygienic Conduit Fittings are used in all areas where cleanliness is a necessity.
Avoiding build-up of dirt is most important in the following industries:
Manufacturing and packaging of food and pharmaceuticals
Clean room technology
Biotechnology
Chemical industry
Smooth finish prevents harmful micro organisms to adhere to the surface no threads are exposed,
Cleaning of fittings is easier, faster and less expensive compared to traditional stainless steel cable glands,
Upper protective cap avoids dirt to enter the system
Suitable for high pressure steam cleaning

Products specifications
Material Body and Cap Stainless Steel 1.4305(AISI 303)
Lock Nut Stainless Steel 1.4305(AISI 303)
Seal TPE, according to FDA guideline 21 CFR 177.2600
Pressure Ring PA6 (Polyamide 6 )
O-Ring NBR
Ferrule Brass
Ingress Protection Rating IP 65, IP 66
UL Environmental Rating TYPE 1, 2 , 4 , 4X, 12, 12K, 13 acc. to UL 50E
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Thread Type
Metric EN 60423
NPT ANSI B1.20.1
Remarks O-ring available in Metric threads.
For assembly from outside only, special tool is available on request.
Smooth finish prevents harmful micro organisms to adhere to the surface.
No threads are exposed.
Cleaning of fittings is easier, faster and less expensive compared to -
traditional stainless steel conduit fittings.
Suitable for high-pressure steam cleaning.
Other steel grades on request.
Outer Thread Size (Male) NPT 1"
Thread Length (TL) 25,0 mm
Ø (D) 52,7 mm
For Sealtite Nominal Size 1"
Spanner Width Cap 46 mm
Allen Screw a 24
Crescent Wrench Body b 42 mm
Lock Nut 46
max. Height (H) 53,5 mm
Part Number BNHF1-04-L