M20x1,5 / 11,0-14,0mm / TL=10,0mm

ATEX

IMQ 13 ATEX 010X | EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-7:2015, EN 60079-31:2014

IECEx

IECEx IMQ 13.0003X | IEC 60079-0:2011 ; IEC 60079-7:2006-07 ; IEC 60079-31:2013

TR RU

No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013

IN METRO

DNV 18.0150 X | ABNT NBR IEC 60079-0:2013, ABNT NBR IEC 60079-7:2008 ABNT NBR IEC 60079-31:2011

MARINE APPROVAL

TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444

Products specifications

Material	Body , Cap	PA 6 (Polyamide 6)
	Seal	CR (Chloroprene) , Silicone
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 66
Operating Temperature		Seal Material
		CR (Chloroprene)	Silicone
		-40°C to +70°C	-60°C to +70°C
Equipment For
		Gas & Dust potentially explosive atmospheres
		Cable glands should be also used for intrinsically safe circuits Ex-i.
		These cable glands shall have a light blue colored cap. The symbol " I " will -
		be added beside of the "HIBM" for order processing.
Suitable for use in
		Group II Gas Group IIC ZONE1/ZONE2
		Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
		Ex II 2GD
		Ex eb IIC Gb Ex tb IIIC Db
Marking Example *
		BMD HIBM-X... CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68
		Ta-60°C to +70°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X
Impact Test Result		7J
Thread Type
		Metric (M) ISO Pitch 1,5
		NPT (N) ANSI ASME B1.20.1
		PG (P) DIN 40430
		Other thread types also available upon request.
Cable Type		Non Armoured
Accessories		Lock nuts
		Gaskets ( Washers )
		Dome plugs
		Dust Plugs
		Double Seals
Remarks		We recommend the use of locknuts and gaskets to ensure IP rating for rough
		surfaces or through holes.
		Accessories must be ordered separately.
		* The standard marking consists ATEX & IECEx only.
Outer	Thread Size (Male)	M20x1,5
	Thread Length (TL)	10,0 mm
	Ø (D)	30,9 mm
Clamping Range	Outer Sheath Ø min - max	11,0 - 14,0 mm
	Seal Type	Single
Spanner Width	Cap	27 mm
	Body	27 mm
max. Height (H)		31,9 mm
Part Number		HIBM-X3

Order Coding
Part Number Mandatory	Seal Mandatory	Gasket (Washer) Option	Seal Type Option	Lock Nut Option	Sealing Plug Option
See table *Part number for blue cap is HIBMI-..	C Chloroprene S Silicone	WC Chloroprene WS Silicone WF Fiber	DS Double Seal	L Lock nut	P Dome Plug
Example
HIBM-X3	S	WC	DS	L	P
*HIBMI-X2

Lock Nuts