EMC 3 Cable Glands, Lead-Free Brass


M16x1,5 / 5,0 - 10,0mm / TL=7,0mm

EMC 3 cable glands with moving spring contact

• Specially designed EMC protective cable glands.
• Lead-free.
• Long-lasting contact by high definition contact spring.
• Moving spring contact offers reduced risk of sheath damage.
• Easy assembly: install cable gland - prepare cable sheath - insert cable - tighten cap.
• High quality strain relief and sealing, reliable performance for EMC applications.
• Up-to-date international approvals.

Products specifications
Material Body , Cap Lead-free brass, Nickel plated
Seal CR ( Chloroprene )
Clamping Insert PA 6 (Polyamide 6)
Contact Spring Special Copper Alloy
O-Ring NBR
Ingress Protection Rating IP 68 - 5 Bar, 30 min
Flammability V2 according to UL94
UL Environmental Rating TYPE 4X acc. to UL 50E
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Thread Type Metric EN 60423
Cable Type Shielded
Accessories EMC Lock nuts
Dome plugs
Gaskets ( Washers )
Remarks In compliance with DIN EN 62444.
We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
Some approvals do not cover all sizes.
O-ring available in Metric thread as a standard.
Accessories must be ordered separately.
Other lock nut types also available upon request.
Outer Thread Size (Male) M16x1,5
Thread Length (TL) 7,0 mm
Ø (D) 22,0 mm
Clamping Range Outer Sheath Ø min - max 5,0 - 10,0 mm
Shield Diameter Ø min-max 4,0 - 8,0 mm
Spanner Width Cap 20 mm
Body 20 mm
max. Height (H) 32,0 mm
Part Number BMEM-E1 (LF)