Hygienic Conduit Fittings Stainless Steel

BMHFX-07

M63x1,5 / TL=20,0mm

Stainless steel Hygienic Conduit Fittings
UL and Type 4X

E507026 | UL514B CSA22.2 No 18.3-12 CSA22.2 No 94.2-1S

 

UL50E

NSF/00

NSF1 | NSF/ANSI 169

NSF2 | NSF/ANSI/3-A 14159-1

Stainless steel Hygienic Conduit Fittings are used in all areas where cleanliness is a necessity.
Avoiding build-up of dirt is most important in the following industries:
Manufacturing and packaging of food and pharmaceuticals
Clean room technology
Biotechnology
Chemical industry
Smooth finish prevents harmful micro organisms to adhere to the surface no threads are exposed,
Cleaning of fittings is easier, faster and less expensive compared to traditional stainless steel cable glands,
Upper protective cap avoids dirt to enter the system
Suitable for high pressure steam cleaning

Products specifications
Material Body and Cap Stainless steel 1.4305(AISI 303), 1.4301(AISI 304), 1.4307(AISI 304L), 1.4401(AISI 316), 1.4404(AISI 316L)
Seal TPE, according to FDA guideline 21 CFR 177.2600
Pressure Ring PA6 (Polyamide 6 )
O-Ring NBR
Ferrule Brass
Ingress Protection Rating IP 65, IP 66
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Thread Type
Metric, according to EN 60423
NPT ANSI B1.20.1
Accessories Lock nuts
Remarks Accessories must be ordered separately.
O-ring available in Metric threads.
Smooth finish prevents harmful micro organisms to adhere to the surface.
No threads are exposed.
Cleaning of fittings is easier, faster and less expensive compared to -
traditional stainless steel cable glands.
Suitable for high-pressure steam cleaning.
Outer Thread Size (Male) M63x1,5
Thread Length (TL) 20,0 mm
Ø (D) 84,6 mm
For Sealtitle Nominal Size 2"
Spanner Width Cap 77 mm
Allen Screw a 48 mm
Crescent Wrench Body b 72 mm
max. Height (H) 70,5 mm
Part Number BMHFX-07