Hygienic Cable Glands Stainless Steel

BMHG1-02-L

M20x1,5 / 6,0-12,0mm / TL=8,0mm

Cable glands for hygienic requirements
UL and Type 4X

E199260 | UL514B, CSA22.2 No 18.3-12, CSA22.2 No 94.2-1S

UL50E

VDE
 VDE_40001820 | DIN EN 62444
EHEDG
| In progress.
MARINE APPROVAL
TAE00003WY | EN62444
NSF/00

NSF1 | NSF/ANSI 169

NSF2 | NSF/ANSI/3-A 14159-1

GOST
GOST | 

• For applications in manufacturing and packaging of food and pharmaceuticals, clean room technology, biotechnology, chemical industry.
• Smooth finish prevents harmful micro organisms to stick to the surface.
• No threads are exposed.
• Gasket material according to FDA guideline 21 CFR 177.2600.
• Cleaning of cable glands is easier, faster and less expensive.
• Reliable strain relief due to strain relief element separated from grommet.
• Suitable for high pressure steam cleaning.
• Lock nut included.

Products specifications
Material Body and Cap Stainless Steel 1.4305(AISI 303)
Lock Nut Stainless Steel 1.4305(AISI 303)
Seal EPDM, according to FDA guideline 21 CFR 177.2600
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 69
IP 66
UL Environmental Rating TYPE 1, 2 , 4 , 4X, 12, 12K, 13 acc. to UL 50E
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Cable Type Non Armoured
Thread Type
Metric EN 60423
NPT ANSI B1.20.1
Accessories Hygienic cable gland adapters
Special tools
Remarks Manufactured according to DIN EN 62444/50262.
We recommend the use of lock nuts to ensure IP rating for rough surfaces -
or through holes.
Accessories must be ordered separately.
For assembly from outside only, special tool is available on request.
Other steel grades on request.
Outer Thread Size (Male) M20x1,5
Thread Length (TL) 8,0 mm
Ø (D) 24,1 mm
Clamping Range Outer Sheath Ø min - max 6,0 - 12,0 mm
Spanner Width Cap 22 mm
Bottom 13 mm
Lock Nut 24
Inner Ø (ID) 12,3 mm
max. Height (H) 29,5 mm
Part Number BMHG1-02-L