Hygienic Cable Glands, EMC Stainless Steel


M20x1,5 / 6,0-12,0mm / TL=8,0mm

EMC cable glands for hygienic requirements
UL and Type 4X

E199260 | UL514B, CSA22.2 No 18.3-12, CSA22.2 No 94.2-1S


 VDE_40001820 | DIN EN 62444
| In progress.
TAE00003WY | EN62444


NSF2 | NSF/ANSI/3-A 14159-1

• For EMC applications in manufacturing and packaging of food and pharmaceuticals, clean room technology, biotechnology, chemical industry.
• Long-lasting contact by high definition contact spring.
• Moving spring contact offers reduced risk of sheath damage.
• Smooth finish prevents harmful micro organisms to adhere on the surface.
• No threads are exposed.
• Gasket material according to FDA guideline 21 CFR 177.2600.
• Cleaning of cable glands is easier, faster and less expensive.
• Reliable strain relief due to strain relief element separated from grommet.
• Suitable for high pressure steam cleaning.
• EMC lock nut included.
• Assembling tool included.

Products specifications
Material Body, Cap and Inner Rings Stainless Steel 1.4305(AISI 303), 1.4301(AISI 304), 1.4307(AISI 304L), 1.4401(AISI 316), 1.4404(AISI 316L)
Clamping Ring POM
Contact Spring Special Copper Alloy
Seal TPE, according to FDA guideline 21 CFR 177.2600
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 69
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Cable Type Shielded
Thread Type
Metric EN 60423
NPT ANSI B1.20.1
Accessories Lock nuts
Tightening tools
Remarks Manufactured according to DIN EN 62444/50262.
We recommend the use of lock nuts to ensure IP rating for rough surfaces -
or through holes.
Accessories must be ordered separately.
Some approvals do not cover all sizes.
Note: 304,304L,3016 and 316L are available upon request
Outer Thread Size (Male) M20x1,5
Thread Length (TL) 8,0 mm
Ø (D) 24,1 mm
Clamping Range Outer Sheath Ø min - max 6,0 - 12,0 mm
Shield Ø min - max 5,0 - 11,0 mm
Spanner Width Cap 22 mm
Bottom 13 mm
Inner Ø (ID) 12,3 mm
max. Height (H) 35,5 mm
Part Number BMEHG1-02-L