Material |
Body , Cap |
PA 6 (Polyamide 6) |
Seal |
CR (Chloroprene) , Silicone |
Ingress Protection Rating |
IP 68 - 5 Bar, 30 min |
IP 66 |
Operating Temperature |
Seal Material |
CR (Chloroprene) |
Silicone |
Ex e/tb / Ex tb / Ex-i |
-40°C to +70°C |
-60°C to +70°C |
Equipment For |
Gas & Dust potentially explosive atmospheres |
Cable glands should be also used for intrinsically safe circuits Ex-i. |
Suitable for use in |
Group II Gas Group IIC ZONE1/ZONE2 |
Group III Dust Group IIIC ZONE21/ZONE 22 |
Equipment Marking |
Ex II 2GD |
Ex eb IIC Gb Ex tb IIIC Db |
Marking Example * |
BMD EHIBM-X.. CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db
|
Ta-40°C to +70°C IP66/68 IECEx IMQ 13.0003X IMQ 13 ATEX 010X |
Impact Test Result |
7J |
Thread Type |
Metric (M) ISO Pitch 1,5 |
Other thread types also available upon request. |
Cable Type |
Non Armoured |
Accessories |
Lock nuts |
Gaskets ( Washers ) |
Dome plugs |
Double Seals |
Dust Plugs |
Remarks |
We recommend the use of lock nuts and gaskets to ensure IP rating for - |
rough surfaces or through holes. |
Accessories must be ordered separately. |
Outer |
Thread Size (Male) |
M63x1,5 |
Thread Length (TL) |
18,0 mm |
Ø (D) |
72,0 mm |
Clamping Range |
Outer Sheath Ø min - max |
28,0 - 44,0 mm |
Seal Type |
Double |
Spanner Width |
Cap |
65 mm |
Body |
65 mm |
max. Height (H) |
60,4 mm |
Part Number |
EHIBMI-X10(DS) |