High Impact Polyamide Cable Glands for Ex i Applications and Heat Trace Cables

HIBMI-XEU25L (10,8x6,0)

M25x1,5 / B=6,0mm TL=15,0mm

IMQ 13 ATEX 010X | EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-7:2015, EN 60079-31:2014 
IECEx IMQ 13.0003X | IEC 60079-0:2011 ; IEC 60079-7:2006-07 ; IEC 60079-31:2013
No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013
TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444
Products specifications
Material Body , Cap PA 6 (Polyamide 6)
Seal CR ( Chloroprene )
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 66
Operating Temperature Seal Material
CR (Chloroprene) Silicone
-40°C to +70°C -60°C to +70°C
Equipment For
Gas & Dust potentially explosive atmospheres
Cable glands should be also used for intrinsically safe circuits Ex-i.
Suitable for use in
Group II Gas Group IIC ZONE1/ZONE2
Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
Ex eb IIC Gb Ex tb IIIC Db
Marking Example *
BMD HIBM-X2.. CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68
Ta-60°C to +70°C IECEx IMQ 13.0003X IMQ 13 ATEX 010X
Impact Test Result 7J
Thread Type
Metric (M) ISO Pitch 1,5
Other thread types also available upon request.
Cable Type Non Armoured, Non Circular, Heat Trace
Accessories Lock nuts
Gaskets ( Washers )
Dust Plugs
Remarks We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
Accessories must be ordered separately.
* The standard marking consists ATEX & IECEx only.
Outer Thread Size (Male) M25x1,5
Thread Length (TL) 15,0 mm
Ø (D) 32,5 mm
Flat Hole Height B 6,0 mm
Width A 10,8 mm
Spanner Width Cap 29 mm
Body 29 mm
max. Height (H) 37,7 mm
Part Number HIBMI-XEU25L (10,8x6,0)
Order Coding
Part Number
Gasket (Washer)
Lock Nut
See table
*Part number for blue cap is HIBMI-..
C Chloroprene
S Silicone
WC Chloroprene
WS Silicone
WF Fiber
L Lock nut
HIBMI-XEU25L (10,8x6,0) C WC L
* HIBMI-X5 (10,8x6,0)