NPT 1" / TL=15,0mm / SW=36mm

ATEX

IMQ 13 ATEX 010X | EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-7:2015, EN 60079-31:2014

IECEx

IECEx IMQ 13.0003X | IEC 60079-0:2011 ; IEC 60079-7:2006-07 ; IEC 60079-31:2013

TR RU

No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013

IN METRO

DNV 18.0150 X | ABNT NBR IEC 60079-0:2013, ABNT NBR IEC 60079-7:2008 ABNT NBR IEC 60079-31:2011

MARINE APPROVAL

TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444

Products specifications

Material	Body, Cap	PA 6 (Polyamide 6)
	O-Ring	CR (Chloroprene) , Silicone
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 66
Operating Temperature		O-ring Material
		CR ( Chloroprene )	Silicone
Ex eb/tb / Ex tb		-40°C to +70°C	-60°C to +70°C
Equipment For
		Gas & Dust potentially explosive atmospheres
		Cable glands should be also used for intrinsically safe circuits Ex-i.
		These cable glands shall have a light blue colored lock nut. The symbol " I " will-
		be added beside of the "HITP" for order processing.
Suitable for use in
		Group II Gas Group IIC ZONE1/ZONE2
		Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
		Ex II 2GD
		Ex eb IIC Gb Ex tb IIIC Db
Marking Example *
		BMD HITP-X... CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68
		Ta -40°C to +70°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X
Impact Test Result		7J
Thread Type
		Metric (M) ISO Pitch 1,5
		NPT (N) ANSI ASME B1.20.1
Accessories		Lock nuts
		Gaskets ( Washers )
Remarks		We recommend the use of locknuts and gaskets to ensure IP rating for rough
		surfaces or through holes.
		Accessories must be ordered separately.
Outer	Thread Size (Male)	NPT 1"
	Thread Length (TL)	15,0 mm
	Ø (D)	41,0 mm
Spanner Width		36 mm
Height (h)		7,8 mm
Part Number		HITN-X3

Order Coding
Part Number Mandatory	Gasket (Washer) Option	Lock Nut Option
See table *Part number for blue cap is HITPI-..	WC Chloroprene WS Silicone WF Fiber	L Lock nut
Example
HITN-X3	WC	L
*HITPI-X02