EMC 2 Cable Glands Brass

BSEN-04

PG 13,5 / 6,0-12,0mm / TL=10,0mm

EMC cable glands with fixed spring contact
GOST
GOST | 

• Specially designed EMC protective cable glands.
• Long-lasting contact by high definition contact spring.
• Easy assembly: 1- install cable gland 2- prepare cable sheath 3- insert cable 4- tighten cap.
• High quality strain relief and Seal, reliable performance for EMC applications.

Products specifications
Material Body , Cap Brass Nickel plated
Seal CR ( Chloroprene )
Clamping Insert PA 6 (Polyamide 6)
Contact Spring Special Copper Alloy
O-Ring NBR
Ingress Protection Rating IP 68 - 5 Bar, 30 min
UL Environmental Rating TYPE 4X acc. to UL 50E
Flammability V2 according to UL94
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -40 °C to +150 °C
Thread Type
Metric EN 60423
PG DIN 40430
NPT ANSI B1.20.1
Other thread types also available upon request.
Cable Type Shielded
Accessories EMC Lock nuts
Dome plugs
Gaskets ( Washers )
Remarks In compliance with DIN EN 62444.
We recommend the use of threaded holes and/or the use of special EMC -
lock nuts to ensure high quality EMC contact quality.
Some approvals do not cover all sizes.
O-ring available in Metric and PG threads as a standard. For NPT -
threads O-ring available upon request.
Accessories must be ordered separately.
Other lock nut types also available upon request.
Outer Thread Size (Male) PG 13,5
Thread Length (TL) 10,0 mm
Ø (D) 24,5 mm
Clamping Range Outer Sheath Ø min - max 6,0 - 12,0 mm
Shield Diameter Ø min-max 5,0 - 10,0 mm
Spanner Width Cap 22 mm
Body 22 mm
max. Height (H) 26,5 mm
Part Number BSEN-04
Order Coding
Part Number
Mandatory
Gasket (Washer)
Option
EMC Loc k Nut
Option
Sealing Plug
Option
See table
WC Chloroprene
WS Silicone
EL EMC Loc k nut
P Dome Plug
T Dust Plug
Example
BSEN-04 WC EL P