Material |
Body , Cap |
Brass Nickel plated |
Seal |
CR ( Chloroprene ) |
Clamping Insert |
PA 6 (Polyamide 6) |
Contact Spring |
Special Copper Alloy |
O-Ring |
NBR |
Ingress Protection Rating |
IP 68 - 5 Bar, 30 min |
UL Environmental Rating |
TYPE 4X acc. to UL 50E |
Flammability |
V2 according to UL94 |
Operating Temperature |
Permanent |
Intermittent |
-20 °C to +100 °C |
-40 °C to +150 °C |
Thread Type |
Metric EN 60423 |
PG DIN 40430 |
NPT ANSI B1.20.1 |
Other thread types also available upon request. |
Cable Type |
Shielded |
Accessories |
EMC Lock nuts |
Dome plugs |
Gaskets ( Washers ) |
Remarks |
In compliance with DIN EN 62444. |
We recommend the use of threaded holes and/or the use of special EMC - |
lock nuts to ensure high quality EMC contact quality. |
Some approvals do not cover all sizes. |
O-ring available in Metric and PG threads as a standard. For NPT - |
threads O-ring available upon request. |
Accessories must be ordered separately. |
Other lock nut types also available upon request. |
Outer |
Thread Size (Male) |
PG 9 |
Thread Length (TL) |
10,0 mm |
Ø (D) |
18,9 mm |
Clamping Range Outer Sheath Ø min - max |
4,0 - 8,0 mm |
Shield Diameter Ø min-max |
3,5 - 6,0 mm |
Spanner Width |
Cap |
17 mm |
Body |
17 mm |
max. Height (H) |
25,5 mm |
Part Number |
BSEN-02 |