M40x1,5 / 18,0-25,0mm / TL=15,0mm

EMC cable glands with fixed spring contact

GOST

GOST |

• Specially designed EMC protective cable glands.
• Long-lasting contact by high definition contact spring.
• Easy assembly: 1- install cable gland 2- prepare cable sheath 3- insert cable 4- tighten cap.
• High quality strain relief and Seal, reliable performance for EMC applications.

Products specifications

Material	Body , Cap	Brass Nickel plated
	Seal	CR ( Chloroprene )
	Clamping Insert	PA 6 (Polyamide 6)
	Contact Spring	Special Copper Alloy
	O-Ring	NBR
Ingress Protection Rating		IP 68 - 5 Bar, 30 min
UL Environmental Rating		TYPE 4X acc. to UL 50E
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-40 °C to +150 °C
Thread Type
		Metric EN 60423
		PG DIN 40430
		NPT ANSI B1.20.1
		Other thread types also available upon request.
Cable Type		Shielded
Accessories		EMC Lock nuts
		Dome plugs
		Gaskets ( Washers )
Remarks		In compliance with DIN EN 62444.
		We recommend the use of threaded holes and/or the use of special EMC -
		lock nuts to ensure high quality EMC contact quality.
		Some approvals do not cover all sizes.
		O-ring available in Metric and PG threads as a standard. For NPT -
		threads O-ring available upon request.
		Accessories must be ordered separately.
		Other lock nut types also available upon request.
Outer	Thread Size (Male)	M40x1,5
	Thread Length (TL)	15,0 mm
	Ø (D)	48,5 mm
Clamping Range Outer Sheath Ø min - max		18,0 - 25,0 mm
Shield Diameter Ø min-max		16,0 - 20,0 mm
Spanner Width	Cap	40 mm
	Body	43 mm
max. Height (H)		40,5 mm
Part Number		BMEN-05

Order Coding
Part Number Mandatory	Gasket (Washer) Option	EMC Loc k Nut Option	Sealing Plug Option
See table	WC Chloroprene WS Silicone	EL EMC Loc k nut	P Dome Plug T Dust Plug
Example
BMEN-05	WC	EL	P

M40x1,5 / 18,0-25,0mm / TL=15,0mm

EMC Lock-Nuts, Metal

Dome Plugs

Gaskets