Material |
Body , Cap |
Brass Nickel plated |
Seal |
CR ( Chloroprene ) |
Clamping Insert |
PA 6 (Polyamide 6) |
Vent. Membran |
PTFE |
O-Ring |
NBR |
Ingress Protection Rating |
IP 66 |
IP 67 |
Flammability |
V2 according to UL94 |
Operating Temperature |
Permanent |
Intermittent |
-20 °C to +100 °C |
-40 °C to +150 °C |
Cable Type |
Non Armoured |
Thread Type |
Metric EN 60423 |
PG DIN 40430 |
Other thread types also available upon request. |
Accessories |
Lock nuts |
Dome plugs |
Gaskets |
Remarks |
Manufactured according to DIN EN 62444/50262. |
We recommend the use of lock nuts and gaskets to ensure IP rating for - |
rough surfaces or through holes. |
O-ring available in Metric and PG threads |
Accessories must be ordered separately. |
Some approvals do not cover all sizes. |
Note: Applications of most cable glands don't require same parameters - |
applied to tests. For applications strictly acc. to the approval definitions - |
Note: please consult data sheet. |
Outer |
Thread Size (Male) |
PG 7 |
Thread Length (TL) |
8,0 mm |
Ø (D) |
18,9 mm |
Clamping Range Outer Sheath Ø min - max |
2,0 - 6,0 mm |
Average Air Flow for ΔP = 70 mbar/1 psi (l/h) |
25 |
Water Intrusion Pressure (mbar) |
0,1 bar |
Spanner Width |
Cap |
17 mm |
Body |
17 mm |
max. Height (H) |
32,5 mm |
Part Number |
BSBCVG-01R |