Material |
Body , Cap |
Stainless steel 1.4305 (AISI 303) |
Seal |
CR ( Chloroprene ) |
Clamping Insert |
PA 6 (Polyamide 6) |
O-Ring |
NBR |
Ingress Protection Rating |
IP 68 - 5 Bar, 30 min |
Flammability |
V2 according to UL94 |
Operating Temperature |
Permanent |
Intermittent |
-20 °C to +100 °C |
-40 °C to +150 °C |
Thread Type |
Metric EN 60423 |
PG DIN 40430 |
NPT ANSI B1.20.1 |
Other thread types also available upon request. |
Cable Type |
Non Armoured |
Accessories |
Lock nuts |
Dome plugs |
Reducing seals |
Flat cable seals |
Multihole seals |
Gaskets ( Washers ) |
Remarks |
Different sealing types available. |
In compliance with DIN EN 62444. |
We recommend the use of lock nuts and gaskets to ensure IP rating for - |
rough surfaces or through holes. |
Some approvals do not cover all sizes. |
Accessories must be ordered separately. |
Some approvals do not cover all sizes. |
O-ring available in Metric and PG threads as a standard. For NPT - |
threads O-ring available upon request. |
Note: Applications of most cable glands don't require same parameters - |
applied to tests. For applications strictly acc. to the approval definitions - |
please consult data sheet. |
Outer |
Thread Size (Male) |
M12x1,5 |
Thread Length (TL) |
6,0 mm |
Ø (D) |
15,5 mm |
Clamping Range Outer Sheath Ø min - max |
2,0 - 5,0 mm |
Spanner Width |
Cap |
14 mm |
Body |
14 mm |
max. Height (H) |
24,0 mm |
Part Number |
BMSD-0S |