w/o thread / Size M20 / 6,0-12,0mm / TL=9,0mm

EMC cable glands with open moving spring contact, front-side assembly, without thread

GOST

GOST |

• Specially designed EMC protective cable glands - easy to assemble to housings without threaded holes.
• Vibration proof EMC performance.
• Long-lasting contact by high definition contact spring.
• Moving spring contact offers reduced risk of sheath damage.
• Easy assembly and disassembly of cable. Spring closes and opens according to fastening of the cap.
• Easy movement of cable as long as not fastened.
• Easy assembly: push cable gland and turn body clockwise - prepare cable sheath - insert cable - tighten cap.
• Perfectly fit to wall thickness 0,5 mm to 4,0 mm.
• High quality strain relief and sealing, reliable performance for EMC applications.

Products specifications

Material	Body , Cap	Brass Nickel plated
	Seal	CR ( Chloroprene )
	Gasket	CR (Chloroprene)
	Clamping Insert	PA 6 (Polyamide 6)
	Lower Body	PA 6 (Polyamide 6)
	Contact Spring	Special Copper Alloy
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 66
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-40 °C to +150 °C
Cable Type		Shielded
Accessories		Dome plugs
		Disassembly tools (one piece included per Minimum Order Quantity)
Remarks		In compliance with DIN EN 62444.
		Accessories must be ordered separately.
Snap	Size	20
	Length (SL)	9,0 mm
	Ø (SD)	19,9 mm
Clamping Range Outer Sheath Ø min - max		6,0 - 12,0 mm
Shield Diameter Ø min-max		4,5 - 10,0 mm
Enclosure Hole Ø		20,2 - 20,4 mm
Spanner Width	Cap	22 mm
	Body	22 mm
Outer Ø (D)		32,3 mm
max. Height (H)		52,5 mm
Part Number		BMEOS-E2S(T)

w/o thread / Size M20 / 6,0-12,0mm / TL=9,0mm

Dome Plugs

Snap-in Gland Disassembling