Ventilation Plugs Polyamide

SBVPX-18S , SBVPX-08S , SBVPX-28S

M40x1,5 / TL=18,0mm / F

Ventilation plugs
UL and Type 4X

E350312 | CAN/CSA C22.2 No.14-2010

GOST
GOST | 

• Balances pressure differences between inner housing and the outside environment.
• Prevents damages according to pressure differences.
• Prevents the formation of water condensation in tightly-sealed standard housings.
• Membrane properties: hydrophobic, oleophobic.

Products specifications
Material Body , Cap PA6 or PC (for UL approved version)
Vent. Membran Acrylic co-polymer on nylon-support
O-Ring NBR (standard for A, D and E types)
Gasket NBR (standard for B, J and F types)
Ingress Protection Rating
IP 68 / IP 67 (for water intrusion pressure 0.1 bar)
IP 69K (only for D types)
Flammability V2 according to UL94
Operating Temperature Permanent Intermittent
-20 °C to +100 °C -30 °C to +150 °C
Thread Type
Metric EN 60423
without thread
Accessories Lock nuts
Remarks Some approvals do not cover all colours or sizes.
Outer Thread Size (Male) M40x1,5
Thread Length (TL) 18,0 mm
Ø (D) 55,3 mm
Average Air Flow for ΔP = 70 mbar/1 psi (l/h) 120
Water Intrusion Pressure (mbar) 0,9 bar
Spanner Width - mm
Height (h) 15,5 mm
Design Type F
Part Number RAL 7035 light grey SBVPX-18S
RAL 7001 grey SBVPX-08S
RAL 9005 black SBVPX-28S