Sorry - this product is no longer available

Polyamide Cable Glands for Ex i Applications and Heat Trace Cables

BMI-XSX6 (10,0x4,0)

M25x1,5 / B=4,0mm / TL=15,0mm

ATEX
IMQ 13 ATEX 011X | EN 60079-0:2009; EN 60079-7:2007; EN 60079-31:2009.The compliance of the equipment is not influenced by the modification introduced by harmonized standards ; EN 60079-0:2012+A11:2013, EN 60079-7:2015, EN 60079-31:2014. 
IECEx
IECEx IMQ 13.0004X | IEC 60079-0:2007-10 ; IEC 60079-7:2006-07 ; IEC 60079-31:2008
TR RU
No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013
MARINE APPROVAL
TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444
Products specifications
Material Body , Cap PA 6 (Polyamide 6)
Seal CR (Chloroprene) , Silicone
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 66
Operating Temperature Seal Material
CR (Chloroprene) Silicone
Ex-i -40°C to +70°C -60°C to +70°C
Equipment For
Gas & Dust potentially explosive atmospheres
Cable glands should be also used for intrinsically safe circuits Ex-i.
Suitable for use in
Group II Gas Group IIC ZONE1/ZONE2
Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
Ex II 2GD
Ex eb IIC Gb / Ex tb IIIC Db
Marking Example *
BMD BM-X2.. CE 0722 II 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68
Ta-40°C to +80°C IMQ 13 ATEX 011X IECEx IMQ 13.0004X
Impact Test Result 4J
Thread Type
Metric (M) ISO Pitch 1,5
Other thread types also available upon request.
Cable Type Non Armoured, Non Circular, Heat Trace
Accessories Lock nuts
Gaskets ( Washers )
Dust Plugs
Remarks We recommend the use of lock nuts and gaskets to ensure IP rating for -
rough surfaces or through holes.
Accessories must be ordered separately.
* The standard marking consists ATEX & IECEx only.
Outer Thread Size (Male) M25x1,5
Thread Length (TL) 15,0 mm
Ø (D) 30,9 mm
Flat Hole Height B 4,0 mm
Width A 10,0 mm
Spanner Width Cap 24 mm
Body 27 mm
max. Height (H) 32,4 mm
Part Number BMI-XSX6 (10,0x4,0)
Order Coding
Part Number
Mandatory
Seal
Mandatory
Gasket (Washer)
Option
Lock Nut
Option
See table
*Part number for blue cap is BMI-..
C Chloroprene
S Silicone
WC Chloroprene
WS Silicone
WF Fiber
L Lock nut
Example
BMI-XSX6 (10,0x4,0) C WC L
* BMI-X2L (10,8x6,0)