Polyamide Hexagonal Plugs for Ex e Applications

TP-X1

M20x1,5 / TL=11,0mm / SW=23mm

ATEX
IMQ 13 ATEX 010X | EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-7:2015, EN 60079-31:2014 
IECEx
IECEx IMQ 13.0003X | IEC 60079-0:2011 ; IEC 60079-7:2006-07 ; IEC 60079-31:2013
TR RU
No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013
IN METRO
DNV 14.0114 X | ABNT NBR IEC 60079-0:2013, ABNT NBR IEC 60079-7:2008 ABNT NBR IEC 60079-31:2014
MARINE APPROVAL
TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444
Products specifications
Material Body, Cap PA 6 (Polyamide 6)
O-Ring CR (Chloroprene) , Silicone
Ingress Protection Rating
IP 68 - 5 Bar, 30 min
IP 66
Operating Temperature O-ring Material
CR ( Chloroprene ) Silicone
Ex eb/tb / Ex tb -40°C to +80°C -60°C to +80°C
Equipment For
Gas & Dust potentially explosive atmospheres
Cable glands should be also used for intrinsically safe circuits Ex-i.
These cable glands shall have a light blue colored lock nut. The symbol " I " will-
be added beside of the "TP" for order processing.
Suitable for use in
Group II Gas Group IIC ZONE1/ZONE2
Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
Ex II 2GD
Ex eb IIC Gb Ex tb IIIC Db
Marking Example *
BMD TP-X... CE 0722 II 2GD Ex e IIC Gb Ex tb IIIC Db IP66/68
Ta -40°C to +80°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X
Impact Test Result 4J
Thread Type
Metric (M) ISO Pitch 1,5
NPT (N) ANSI ASME B1.20.1
Accessories Lock nuts
Gaskets ( Washers )
Remarks We recommend the use of locknuts and gaskets to ensure IP rating for rough
surfaces or through holes.
Accessories must be ordered separately.
Outer Thread Size (Male) M20x1,5
Thread Length (TL) 11,0 mm
Ø (D) 26,0 mm
Spanner Width 23 mm
Height (h) 6,0 mm
Part Number TP-X1
Order Coding
Part Number
Mandatory
Gasket (Washer)
Option
Lock Nut
Option
See table
*Part number for blue cap is TPI-..
WC Chloroprene
WF Fiber
WS Silicone
L Lock nut
Example
TP-X1 WC L
* TPI-X02